Stroodies AQ-Safe Juvenile Aqualoft

$16.00

Stroodies + Bettas = 💗🐟🐠

The Stroodies Aqualoft is now available in our Juvenile size!! Perfect for bettas, cichlids, shrimp, and other small to medium size fish and other aquatic buddies!

Order includes one fully-assembled Juvenile Aqualoft (with 2x built-in aquarium safe magnets) and two MagBacks (with 1x built-in magnet each) for a total of four powerful Neodymium Rare-Earth Magnets. We use the strongest type of permanent-magnet in the universe!

This Hide was designed specifically for betta fish and other small aquatic buddies. If your buddy is a lil' bigger or is an axolotl be sure to check out all our varieties of Aqualofts and Lotl' Lofts!

---------------------------------------------------------------------------------------------------------

This Juvenile-Sized Aqualoft Hide is about 4" wide and about 2" tall. It is the same dimensions as

---------------------------------------------------------------------------------------------------------

KEEP MAGNETS AWAY FROM CHILDREN, PACEMAKERS, AND OTHER SENSITIVE ELECTRONICS. I'm serious.

The rare-earth metal Neodymium makes the strongest magnets, but it is also relatively fragile for a metal. The magnets included in your order are all encased in plastic which makes them much more durable than usual but a significant drop onto a hard surface could still break them. They also have enough magnetic strength to break against each other if one magnet is haphazardly placed near another and allowed to go clack. That being said, when I've dropped the encased magnets on my tile floor and they just laugh and bounce. 😜

Magnets are very stable while in use. Every one of these Neodymium Magnets is electroplated with a triple coating of nickel, copper and nickel again to protect against corrosion. Our aquarium safe magnets are then encased in a special epoxy to keep the metal from contacting any water! Typically, these metallic coatings would get scratched over time which eventually would result in rust. BUT, your magnets won't get scratched because they are encased in epoxy and then plastic! You can expect these Neodymium magnets to remain powerful and effective for a very long time.

DO NOT USE BROKEN MAGNETS If the metal is broken, discard broken magnets immediately!

If a break occurs, please contact Stroodies immediately (after discarding broken magnets) for information about replacing broken Magnets.

Remove any broken magnet from use immediately and discard carefully.

Magnetic shards are sharp and, if ingested, very dangerous. Fortunately, they all stick together which makes cleanup relatively simple. Stroodies recommends against using any magnets in your terrariums that are not encased in plastic or sealed by some other means. Even tape would be better than nothing, just to contain potential shards if a break occurs. If the plastic around your new magnets becomes damaged please contact Stroodies about proactive repair/replacement options. Contact Stroodies if you observe rust/corrosion on or around the magnets as rust would indicate that the nickel plating has failed and the magnets could lose strength (this is exceedingly unlikely so long as the plastic remains intact).

👍 So, magnets are not toys but they are a heck of a lot of fun! 👍

---------------------------------------------------------------------------------------------------------

All of the BubbleLoft Crested Gecko Hides are washable with reptile-safe soap and warm water. The plastics will remain sturdy and resilient for years. Any reptile-safe temperature is safe for the plastic.

I make these beauties with my customized 3D printers out of PETG plastic and PLA plastic in Rochester, NY.

PETG is the same type of plastic used to make water bottles. PLA plastic is comprised of tough fibers from plants like sugar cane or corn. Both of these materials will hold up for years in a Gecko environment. Stroodies stands behind all of our products because we have our own geckos and we love them very much.

I can typically restock any Stroodies color within 24 hours of your request

Want a customized version? Have something totally different in mind? Let me know!

New prototype testers may qualify for free stuff!

---------------------------------------------------------------------------------------------------------------------

This product complies with EU safety requirements. Our EU Responsible Person is EU Compliance Partner, located at Pärnu mnt. 139b – 14, 11317 Tallinn, Estonia. For any inquiries, please visit www.eucompliancepartner.com.

Color:

Stroodies + Bettas = 💗🐟🐠

The Stroodies Aqualoft is now available in our Juvenile size!! Perfect for bettas, cichlids, shrimp, and other small to medium size fish and other aquatic buddies!

Order includes one fully-assembled Juvenile Aqualoft (with 2x built-in aquarium safe magnets) and two MagBacks (with 1x built-in magnet each) for a total of four powerful Neodymium Rare-Earth Magnets. We use the strongest type of permanent-magnet in the universe!

This Hide was designed specifically for betta fish and other small aquatic buddies. If your buddy is a lil' bigger or is an axolotl be sure to check out all our varieties of Aqualofts and Lotl' Lofts!

---------------------------------------------------------------------------------------------------------

This Juvenile-Sized Aqualoft Hide is about 4" wide and about 2" tall. It is the same dimensions as

---------------------------------------------------------------------------------------------------------

KEEP MAGNETS AWAY FROM CHILDREN, PACEMAKERS, AND OTHER SENSITIVE ELECTRONICS. I'm serious.

The rare-earth metal Neodymium makes the strongest magnets, but it is also relatively fragile for a metal. The magnets included in your order are all encased in plastic which makes them much more durable than usual but a significant drop onto a hard surface could still break them. They also have enough magnetic strength to break against each other if one magnet is haphazardly placed near another and allowed to go clack. That being said, when I've dropped the encased magnets on my tile floor and they just laugh and bounce. 😜

Magnets are very stable while in use. Every one of these Neodymium Magnets is electroplated with a triple coating of nickel, copper and nickel again to protect against corrosion. Our aquarium safe magnets are then encased in a special epoxy to keep the metal from contacting any water! Typically, these metallic coatings would get scratched over time which eventually would result in rust. BUT, your magnets won't get scratched because they are encased in epoxy and then plastic! You can expect these Neodymium magnets to remain powerful and effective for a very long time.

DO NOT USE BROKEN MAGNETS If the metal is broken, discard broken magnets immediately!

If a break occurs, please contact Stroodies immediately (after discarding broken magnets) for information about replacing broken Magnets.

Remove any broken magnet from use immediately and discard carefully.

Magnetic shards are sharp and, if ingested, very dangerous. Fortunately, they all stick together which makes cleanup relatively simple. Stroodies recommends against using any magnets in your terrariums that are not encased in plastic or sealed by some other means. Even tape would be better than nothing, just to contain potential shards if a break occurs. If the plastic around your new magnets becomes damaged please contact Stroodies about proactive repair/replacement options. Contact Stroodies if you observe rust/corrosion on or around the magnets as rust would indicate that the nickel plating has failed and the magnets could lose strength (this is exceedingly unlikely so long as the plastic remains intact).

👍 So, magnets are not toys but they are a heck of a lot of fun! 👍

---------------------------------------------------------------------------------------------------------

All of the BubbleLoft Crested Gecko Hides are washable with reptile-safe soap and warm water. The plastics will remain sturdy and resilient for years. Any reptile-safe temperature is safe for the plastic.

I make these beauties with my customized 3D printers out of PETG plastic and PLA plastic in Rochester, NY.

PETG is the same type of plastic used to make water bottles. PLA plastic is comprised of tough fibers from plants like sugar cane or corn. Both of these materials will hold up for years in a Gecko environment. Stroodies stands behind all of our products because we have our own geckos and we love them very much.

I can typically restock any Stroodies color within 24 hours of your request

Want a customized version? Have something totally different in mind? Let me know!

New prototype testers may qualify for free stuff!

---------------------------------------------------------------------------------------------------------------------

This product complies with EU safety requirements. Our EU Responsible Person is EU Compliance Partner, located at Pärnu mnt. 139b – 14, 11317 Tallinn, Estonia. For any inquiries, please visit www.eucompliancepartner.com.