Stroodies AQ Safe Magnetic Betta Bubble

$15.00

Stroodies Betta Bubble has gone magnetic! 🧲🧲 Our very popular suction cup Betta hide is now available in an aquarium safe magnetic version. Same great hide! New attachments!

The Betta Bubble is based off of Stroodies Classic Bubbleloft Hides for Lizards. But for fish! This modified design opens up the loft to a circular shape for easier swimming. 🐳🦑🐙 It also features a second entrance on top of the Betta Bubble so your fishy buddies can swim in from the front of the hide or out from the top!

The Magnetic Betta Bubble is roughly 4 inches in diameter. Front and Top entrances are about 2 inches in diameter.

---------------------------------------------------------------------------------------------------------

KEEP MAGNETS AWAY FROM CHILDREN, PACEMAKERS, AND OTHER SENSITIVE ELECTRONICS. I'm serious.

The rare-earth metal Neodymium makes the strongest magnets, but it is also relatively fragile for a metal. The magnets included in your order are all encased in plastic which makes them much more durable than usual but a significant drop onto a hard surface could still break them. They also have enough magnetic strength to break against each other if one magnet is haphazardly placed near another and allowed to go clack. That being said, when I've dropped the encased magnets on my tile floor and they just laugh and bounce. 😜

Magnets are very stable while in use. Every one of these Neodymium Magnets is electroplated with a triple coating of nickel, copper and nickel again to protect against corrosion. Our aquarium safe magnets are then encased in a special epoxy to keep the metal from contacting any water! Typically, these metallic coatings would get scratched over time which eventually would result in rust. BUT, your magnets won't get scratched because they are encased in epoxy and then plastic! You can expect these Neodymium magnets to remain powerful and effective for a very long time.

DO NOT USE BROKEN MAGNETS If the metal is broken, discard broken magnets immediately!

If a break occurs, please contact Stroodies immediately (after discarding broken magnets) for information about replacing broken Magnets.

Remove any broken magnet from use immediately and discard carefully.

Magnetic shards are sharp and, if ingested, very dangerous. Fortunately, they all stick together which makes cleanup relatively simple. Stroodies recommends against using any magnets in your terrariums that are not encased in plastic or sealed by some other means. Even tape would be better than nothing, just to contain potential shards if a break occurs. If the plastic around your new magnets becomes damaged please contact Stroodies about proactive repair/replacement options. Contact Stroodies if you observe rust/corrosion on or around the magnets as rust would indicate that the nickel plating has failed and the magnets could lose strength (this is exceedingly unlikely so long as the plastic remains intact).

👍 So, magnets are not toys but they are a heck of a lot of fun! 👍

Please note this hide uses special epoxy-coated aquarium safe magnets that can be used underwater. Our standard magnets advertised for reptiles are not safe for use in aquariums. Please ask about making other magnetic products aquarium safe! 🐠🐟💗

---------------------------------------------------------------------------------------------------------

The Betta Bubble is washable with warm water and aquarium-safe cleansers. The plastics will remain sturdy and resilient for years.

I can typically restock any Stroodies color within 24 hours of your request

Check out my always-growing line of Premium Reptile and Aquarium Supplies at my shop:

Stroodies.etsy.com

Want a customized version? Have a better idea? Let me know by clicking "Ask a Question" (top right of this page)!

New prototype testers get free stuff and/or a sweet discount!

---------------------------------------------------------------------------------------------------------------------

This product complies with EU safety requirements. Our EU Responsible Person is EU Compliance Partner, located at Pärnu mnt. 139b – 14, 11317 Tallinn, Estonia. For any inquiries, please visit www.eucompliancepartner.com.

Color:

Stroodies Betta Bubble has gone magnetic! 🧲🧲 Our very popular suction cup Betta hide is now available in an aquarium safe magnetic version. Same great hide! New attachments!

The Betta Bubble is based off of Stroodies Classic Bubbleloft Hides for Lizards. But for fish! This modified design opens up the loft to a circular shape for easier swimming. 🐳🦑🐙 It also features a second entrance on top of the Betta Bubble so your fishy buddies can swim in from the front of the hide or out from the top!

The Magnetic Betta Bubble is roughly 4 inches in diameter. Front and Top entrances are about 2 inches in diameter.

---------------------------------------------------------------------------------------------------------

KEEP MAGNETS AWAY FROM CHILDREN, PACEMAKERS, AND OTHER SENSITIVE ELECTRONICS. I'm serious.

The rare-earth metal Neodymium makes the strongest magnets, but it is also relatively fragile for a metal. The magnets included in your order are all encased in plastic which makes them much more durable than usual but a significant drop onto a hard surface could still break them. They also have enough magnetic strength to break against each other if one magnet is haphazardly placed near another and allowed to go clack. That being said, when I've dropped the encased magnets on my tile floor and they just laugh and bounce. 😜

Magnets are very stable while in use. Every one of these Neodymium Magnets is electroplated with a triple coating of nickel, copper and nickel again to protect against corrosion. Our aquarium safe magnets are then encased in a special epoxy to keep the metal from contacting any water! Typically, these metallic coatings would get scratched over time which eventually would result in rust. BUT, your magnets won't get scratched because they are encased in epoxy and then plastic! You can expect these Neodymium magnets to remain powerful and effective for a very long time.

DO NOT USE BROKEN MAGNETS If the metal is broken, discard broken magnets immediately!

If a break occurs, please contact Stroodies immediately (after discarding broken magnets) for information about replacing broken Magnets.

Remove any broken magnet from use immediately and discard carefully.

Magnetic shards are sharp and, if ingested, very dangerous. Fortunately, they all stick together which makes cleanup relatively simple. Stroodies recommends against using any magnets in your terrariums that are not encased in plastic or sealed by some other means. Even tape would be better than nothing, just to contain potential shards if a break occurs. If the plastic around your new magnets becomes damaged please contact Stroodies about proactive repair/replacement options. Contact Stroodies if you observe rust/corrosion on or around the magnets as rust would indicate that the nickel plating has failed and the magnets could lose strength (this is exceedingly unlikely so long as the plastic remains intact).

👍 So, magnets are not toys but they are a heck of a lot of fun! 👍

Please note this hide uses special epoxy-coated aquarium safe magnets that can be used underwater. Our standard magnets advertised for reptiles are not safe for use in aquariums. Please ask about making other magnetic products aquarium safe! 🐠🐟💗

---------------------------------------------------------------------------------------------------------

The Betta Bubble is washable with warm water and aquarium-safe cleansers. The plastics will remain sturdy and resilient for years.

I can typically restock any Stroodies color within 24 hours of your request

Check out my always-growing line of Premium Reptile and Aquarium Supplies at my shop:

Stroodies.etsy.com

Want a customized version? Have a better idea? Let me know by clicking "Ask a Question" (top right of this page)!

New prototype testers get free stuff and/or a sweet discount!

---------------------------------------------------------------------------------------------------------------------

This product complies with EU safety requirements. Our EU Responsible Person is EU Compliance Partner, located at Pärnu mnt. 139b – 14, 11317 Tallinn, Estonia. For any inquiries, please visit www.eucompliancepartner.com.