Stroodies Lotl Lounge Ledge | AQ-Safe Magnetic Hangout

$23.00

Ok, so your lil' lotl' has a loft, but does it have a place to lounge? πŸ›ŒπŸ πŸ’€

Stroodies Lotl Lounge Ledge gives your favorite aquarium buddies a space to just hang out and relax! Perfect for axolotls, bettas, and other sea dwelling creatures to have a place to relax below the surface!

πŸ“πŸ“Small Lotl Ledge surface measures roughly 3.6x2.5 inches. Regular Lotl Ledge surface measures about 7x3.6 inches. Skinny variation is roughly 8x3.12 inches. πŸ“πŸ“

This ledge hangs securely on aquarium walls using a total of 4x aquarium-safe magnets. (2x magnets in the Ledge & 2x "magBacks" on the outside of the glass). Stroodies Magbacks are roughly 1.7 inches in diameter.

---------------------------------------------------------------------------------------------------------

KEEP MAGNETS AWAY FROM CHILDREN, PACEMAKERS, AND OTHER SENSITIVE ELECTRONICS.

I'm serious.

The rare-earth metal Neodymium makes the strongest magnets, but it is also relatively fragile for a metal. The magnets included in your order are all encased in plastic which makes them much more durable than usual but a significant drop onto a hard surface could still break them. That being said, when I've dropped the encased magnets on my tile floor and they just laugh and bounce. 😜

Magnets are very stable while in use.

These neodymium magnets are electroplated with a coating of copper and then nickel to protect the magnet. Typically, these metallic coatings would get scratched over time which eventually would result in corrosion... BUT these magnets are coated again with impermeable epoxy! Epoxy usually scratches easily which typically results in corrosion anyway... BUT, your magnets won't get scratched because they are encased in Stroodiful plastic! You can expect these Neodymium magnets to remain powerful and effective for a very long time.

🐠🐟 These Epoxy-Coated magnets are YES SAFE FOR AQUARIUMS 🐠🐟

An awesome epoxy coating makes these magnets (and those found in all Stroodies Aquarium products) safe to be submerged underwater. However, these magnets are also a slightly lower grade than Stroodies original magnets and the epoxy adds an extra layer between the magnets. That means these magnets won't hold very well out of water. Want a Lounger for your terrestrial buddies? Check out our Stroodies HEAVY-DUTY Magledge listing and look for the "Lounge (no slots) option under Ledge Size!!

DO NOT USE BROKEN MAGNETS If you can see metal through the black-epoxy coating discontinue use immediately and contact Stroodies for help! (We still have no reported occurrences)

If the plastic around your magnets should break please contact Stroodies immediately (after discarding any broken magnets) for proactive repair/replacement solutions.

Discontinue use immediately and contact Stroodies if you observe rust/corrosion on or around the magnets as rust would indicate that the nickel plating has failed and the magnets could lose strength (This is exceedingly unlikely so long as the plastic remains intact, we've never heard of an occurrence).

πŸ‘ So, magnets are not toys but they are a heck of a lot of fun! πŸ‘

--------------------------------------------------------------------------------------------------------

πŸ›€ All of Stroodies' products are washable with reptile-safe soap and warm water πŸ›€ including this Magnetic Lotl Ledge. Yes, even with the magnets.

🌑Any temperature that's safe for your pets and/or comfortable for you is okay for the plastic and magnets.

--------------------------------------------------------------------------------------------------------

I designed the Stroodies Lotl Lounge Ledge and make them at Stroodies with my customized 3D printers out PLA plastic in Rochester, NY. Each one is hand-finished.

PLA plastic is made from tough plant fibers like sugarcane or corn. This materials will hold up for years in a Gecko environment.

--------------------------------------------------------------------------------------------------------

Stroodies stands behind all of our products because we have our own geckos and we love them very much.

---------------------------------------------------------------------------------------------------------------------

This product complies with EU safety requirements. Our EU Responsible Person is EU Compliance Partner, located at PΓ€rnu mnt. 139b – 14, 11317 Tallinn, Estonia. For any inquiries, please visit www.eucompliancepartner.com.

Size:
Magnets:
Color:

Ok, so your lil' lotl' has a loft, but does it have a place to lounge? πŸ›ŒπŸ πŸ’€

Stroodies Lotl Lounge Ledge gives your favorite aquarium buddies a space to just hang out and relax! Perfect for axolotls, bettas, and other sea dwelling creatures to have a place to relax below the surface!

πŸ“πŸ“Small Lotl Ledge surface measures roughly 3.6x2.5 inches. Regular Lotl Ledge surface measures about 7x3.6 inches. Skinny variation is roughly 8x3.12 inches. πŸ“πŸ“

This ledge hangs securely on aquarium walls using a total of 4x aquarium-safe magnets. (2x magnets in the Ledge & 2x "magBacks" on the outside of the glass). Stroodies Magbacks are roughly 1.7 inches in diameter.

---------------------------------------------------------------------------------------------------------

KEEP MAGNETS AWAY FROM CHILDREN, PACEMAKERS, AND OTHER SENSITIVE ELECTRONICS.

I'm serious.

The rare-earth metal Neodymium makes the strongest magnets, but it is also relatively fragile for a metal. The magnets included in your order are all encased in plastic which makes them much more durable than usual but a significant drop onto a hard surface could still break them. That being said, when I've dropped the encased magnets on my tile floor and they just laugh and bounce. 😜

Magnets are very stable while in use.

These neodymium magnets are electroplated with a coating of copper and then nickel to protect the magnet. Typically, these metallic coatings would get scratched over time which eventually would result in corrosion... BUT these magnets are coated again with impermeable epoxy! Epoxy usually scratches easily which typically results in corrosion anyway... BUT, your magnets won't get scratched because they are encased in Stroodiful plastic! You can expect these Neodymium magnets to remain powerful and effective for a very long time.

🐠🐟 These Epoxy-Coated magnets are YES SAFE FOR AQUARIUMS 🐠🐟

An awesome epoxy coating makes these magnets (and those found in all Stroodies Aquarium products) safe to be submerged underwater. However, these magnets are also a slightly lower grade than Stroodies original magnets and the epoxy adds an extra layer between the magnets. That means these magnets won't hold very well out of water. Want a Lounger for your terrestrial buddies? Check out our Stroodies HEAVY-DUTY Magledge listing and look for the "Lounge (no slots) option under Ledge Size!!

DO NOT USE BROKEN MAGNETS If you can see metal through the black-epoxy coating discontinue use immediately and contact Stroodies for help! (We still have no reported occurrences)

If the plastic around your magnets should break please contact Stroodies immediately (after discarding any broken magnets) for proactive repair/replacement solutions.

Discontinue use immediately and contact Stroodies if you observe rust/corrosion on or around the magnets as rust would indicate that the nickel plating has failed and the magnets could lose strength (This is exceedingly unlikely so long as the plastic remains intact, we've never heard of an occurrence).

πŸ‘ So, magnets are not toys but they are a heck of a lot of fun! πŸ‘

--------------------------------------------------------------------------------------------------------

πŸ›€ All of Stroodies' products are washable with reptile-safe soap and warm water πŸ›€ including this Magnetic Lotl Ledge. Yes, even with the magnets.

🌑Any temperature that's safe for your pets and/or comfortable for you is okay for the plastic and magnets.

--------------------------------------------------------------------------------------------------------

I designed the Stroodies Lotl Lounge Ledge and make them at Stroodies with my customized 3D printers out PLA plastic in Rochester, NY. Each one is hand-finished.

PLA plastic is made from tough plant fibers like sugarcane or corn. This materials will hold up for years in a Gecko environment.

--------------------------------------------------------------------------------------------------------

Stroodies stands behind all of our products because we have our own geckos and we love them very much.

---------------------------------------------------------------------------------------------------------------------

This product complies with EU safety requirements. Our EU Responsible Person is EU Compliance Partner, located at PΓ€rnu mnt. 139b – 14, 11317 Tallinn, Estonia. For any inquiries, please visit www.eucompliancepartner.com.